HDMI Extender over single Coaxial Cable with IR

l Introduction

The HDMI Over Single Coax Extender sends HDMI signals Over just one 75Ohm Coaxial cable -- up to100m away. The HDMI Over Single Coax Extender supports HDMI 1.3 and HDCP 1.1 with features such as Deep Color and 1080p.By using standard and widely available 75Ohm RG-6U cables, the HDMI Over Single Coax Extender makes HDMI signal extensions to be easier than heavy and expensive copper cable and more robust than optical fiber. The Extender includes two units: transmitter and receiver. The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The Extender offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and is the perfect solution for any application.

l Features

Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75Ohm RG-6U Coax cable.
Audio and video are transmitted digitally over the 75Ohm RG-6U Coax cable with zero signal loss.
Single Link Range: 1080p/60, 12 bit color depth.
Compliant with HDMI 1.3, HDCP 1.1 standards.
Supports digital video formats in Deep Color Mode at up to 12bits/color.
Supports PCM 48KHz audio.
Supports Cascade function in Transmitter and Receiver and it is easy to build a network system by installer.
Lip-Sync Pass Through.
Bi-directional IR system allowing for control of source or display (IR accessories included)

l Package Contents:

(1) [TX & RX]

(1) IR Blaster (TX)

(1) IR Receiver (RX)

(2) DC 5V in line power supply

(1)User Manual

l Specification

Frequency Bandwidth	225MHz/link (HDMI 1.3)
In/Output Support Resolution	480p, 576p, 720p@50/59.94,60 1080p@23.98/24/25/29.97/30/50/59.94/60
Input TMDS Signal:	3.3 volts
Input DDC Signal:	5.0 volts/P-P
ESD Protection Human body model	±8kV (air-gap discharge) ±4kV (contact discharge)
Coaxial Cable Distance	Full HD up to 100M (RG-6U cables) HD up to 200M (RG-6U cables) SD up to 300M (RG-6U cables )
Dimension (mm)	80(D)x49(W)x25(H)
Weight (g)	115
Power Supply:	(2) 5V1A DC
Power consumption:	2.3 watts (TX); 2.2 watts (RX)
Operation temperature:	32~104 °F
Storage temperature:	-4 ~140 °F
Relative humidity:	20~90 % RH (no condensation)

l Operation Controls and Functions

Transmitter

Front Panel Rear Panel

u Coaxial : Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.

u LED:This LED will illuminate when the device is connected with DC source

u 5V-12V: Plug the 5V-12V DC power supply into the unit and connect the adaptor to an AC outlet. The red LED will turn on when the power is on.

u HDMI : This slot is to connect with the input source equipment such as DVD or Blue-ray player with connection cable for input video and audio signal transmission.

u IR TX: Connect the IR Blaster cable included in the package for IR signal transmission. Pace the IR blaster in direct line-of-sight of the equipment to be controlled.

Receiver

Front Panel Rear Panel

u Coaxial : Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.

u LED:This LED will illuminate when the device is connected with DC source

u 5V-12V: Plug the 5V-12V DC power supply into the unit and connect the adaptor to an AC outlet. The red LED will turn on when the power is on.

u HDMI : This slot is where you connect a HDMI display with a HDMI cable .

u IR RX: Connect to the IR Receiver for IR signal reception. Ensure that remote being used is within the direct line-of-sight of the IR receiver.